top of page

Terms & Conditions

These Terms and Conditions (“Terms”) govern all purchases of products from H3 Materials (“H3 Materials,” “we,” “us,” or “our”), whether made through our website, by telephone, email, purchase order, invoice, or otherwise.

​

By placing an order with H3 Materials, the purchaser (“Customer,” “you,” or “your”) acknowledges and agrees to these Terms. These Terms apply to all sales unless H3 Materials expressly agrees otherwise in writing.

​

1. Products & Specifications

H3 Materials supplies aluminum composite material (“ACM”) and other sheet materials for commercial and industrial applications.

Product specifications, dimensions, weights, colors, finishes, photographs, descriptions, and other information are intended to reasonably describe our products. Products are subject to normal manufacturing tolerances and reasonable variations inherent in industrial materials and manufacturing processes.

Customer is responsible for confirming that the product, dimensions, specifications, finish, and other characteristics are suitable for its intended application before ordering.

​

2. Color, Gloss & Finish Variations

Colors displayed on websites, monitors, mobile devices, photographs, printed materials, samples, and digital color charts may differ from the appearance of the actual product.

Reasonable variations in color, shade, gloss, texture, surface appearance, and finish may occur between production runs or lots and do not, by themselves, constitute a product defect.

Where color consistency is important, Customer should purchase sufficient material from the same production lot whenever possible and inspect material before fabrication or installation.

 

3. Pricing

Prices are subject to change without notice until an order has been accepted by H3 Materials.

Unless expressly stated otherwise, pricing excludes freight, shipping, taxes, duties, accessorial charges, special handling, storage, detention, redelivery, and other applicable charges.

H3 Materials reserves the right to correct typographical, pricing, calculation, specification, inventory, or website errors. If an error affects an order, H3 Materials may correct or cancel the affected order before shipment and refund any applicable payment.

 

4. Order Acceptance & Cancellation

All orders are subject to acceptance by H3 Materials.

Submission of an order, purchase order, or payment does not by itself constitute final acceptance.

H3 Materials reserves the right to reject or cancel an order due to product availability, pricing or specification errors, payment issues, suspected fraud, credit concerns, shipping limitations, or other reasonable commercial circumstances.

Once material has been allocated, processed, prepared for shipment, specially ordered, manufactured, or shipped, the order may not be changed or cancelled without written approval from H3 Materials.

 

5. Payment

Payment is due according to the terms stated at checkout, on the applicable quotation, order confirmation, invoice, or approved credit arrangement.

Customers purchasing on credit agree to pay all invoices when due.

To the fullest extent permitted by applicable law, past-due balances may be subject to interest or service charges and reasonable costs associated with collection.

H3 Materials may suspend shipments, cancel unfulfilled orders, place an account on hold, or revoke credit terms when amounts are past due or when H3 Materials reasonably determines that payment risk has materially increased.

 

6. Shipping & Delivery

Shipping and delivery dates are estimates unless H3 Materials expressly guarantees a delivery date in writing.

H3 Materials is not responsible for delays caused by carriers, weather, labor disruptions, equipment failures, natural disasters, governmental actions, port congestion, transportation shortages, supply interruptions, or other circumstances outside our reasonable control.

Customer is responsible for providing complete and accurate shipping information and ensuring the delivery location can safely accommodate the applicable vehicle, shipment, and unloading requirements.

Additional charges resulting from incorrect delivery information, limited-access locations, detention, storage, redelivery, liftgate service, refused shipments, failed delivery attempts, or other Customer-related circumstances may be charged to Customer.

 

7. Freight Damage & Shipment Inspection

Customer must inspect every shipment immediately upon delivery and before accepting the shipment whenever reasonably possible.

Visible shortages, crushed packaging, punctures, bent material, damaged pallets, water exposure, or other visible irregularities should be clearly documented on the carrier's delivery receipt before the shipment is accepted.

Customer should photograph the shipment, packaging, pallet, and affected material before unloading or removing packaging when damage is apparent.

Visible freight damage or shortage claims must be reported to H3 Materials as soon as reasonably possible and, in any event, within 48 hours of delivery, except where a longer period is required by applicable law.

Customer must retain affected material and original packaging until the claim has been investigated or resolved.

Failure to timely inspect, document, preserve, and report visible freight damage may impair or prevent recovery from the carrier and may limit H3 Materials' ability to provide a remedy.

 

8. Inspection Before Fabrication or Installation

All material must be inspected before cutting, routing, drilling, bending, printing, laminating, forming, installing, fabricating, or otherwise modifying the product.

Customer must verify product type, quantity, dimensions, color, finish, surface condition, and other readily observable characteristics before processing the material.

Do not fabricate or install material that appears damaged, defective, incorrect, or outside the agreed specification.

Fabrication, modification, installation, or use of material constitutes acceptance of readily observable characteristics that reasonably should have been identified during inspection.

To the fullest extent permitted by law, H3 Materials is not responsible for fabrication costs, labor charges, installation, removal, reinstallation, production downtime, lost production, or other costs arising from the use or processing of material containing an issue that reasonably could have been identified before fabrication or installation.

 

9. Returns

No product may be returned without prior authorization from H3 Materials.

Except for verified defective, damaged, or incorrectly shipped material, acceptance of a return is at the sole discretion of H3 Materials, subject to applicable law.

Approved returns must be unused, unmodified, undamaged, and in resalable condition.

Restocking fees, outbound freight, return freight, handling charges, and other applicable expenses may be deducted from any refund or credit.

Custom products, special-order products, custom colors, cut-to-size products, and products manufactured or procured specifically for a Customer are final sale and non-returnable except where required by law or where H3 Materials determines that the product materially fails to conform to the agreed specifications.

 

10. Limited Product Warranty

H3 Materials warrants that products will materially conform to the specifications expressly stated in the applicable product documentation, quotation, or order confirmation at the time of shipment, subject to normal manufacturing tolerances.

Unless a separate written warranty expressly provides otherwise, this warranty does not cover damage, deterioration, or failure resulting from improper transportation after delivery, storage, handling, fabrication, installation, misuse, modification, abuse, improper maintenance, incompatible materials, or environmental exposure inconsistent with the product's intended application.

For a valid and timely product claim, H3 Materials may, at its option and subject to applicable law, repair or replace the affected product, issue a credit, or refund the purchase price attributable to the affected product.

These remedies constitute Customer's exclusive remedies for covered product claims to the fullest extent permitted by applicable law.

 

11. Product Selection & Suitability

Customer is solely responsible for determining whether a product is appropriate for its particular application, manufacturing process, environment, design, installation method, regulatory requirements, and intended use.

Product information, recommendations, technical information, samples, or assistance provided by H3 Materials are intended to assist Customer and do not replace Customer's own testing, engineering, regulatory review, or professional judgment where appropriate.

Unless expressly warranted in writing, H3 Materials does not guarantee that a product is suitable for a particular application merely because Customer communicated its intended use to H3 Materials.

 

12. Storage & Handling

Customer is responsible for properly storing and handling products following delivery.

Products should be protected from moisture, excessive heat, physical damage, contamination, improper stacking, prolonged exposure to unsuitable environmental conditions, and other circumstances that could adversely affect the material.

Damage resulting from improper storage, handling, fabrication, or use after delivery is not considered a manufacturing defect.

 

13. Limitation of Liability

TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, H3 MATERIALS WILL NOT BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES ARISING FROM OR RELATED TO THE PURCHASE, DELIVERY, POSSESSION, USE, FABRICATION, INSTALLATION, RESALE, OR PERFORMANCE OF ANY PRODUCT.

This limitation includes, without limitation, claims for lost profits, lost revenue, lost production, business interruption, loss of contracts, loss of use, labor charges, fabrication expenses, removal costs, reinstallation costs, or other consequential economic losses.

TO THE FULLEST EXTENT PERMITTED BY LAW, THE TOTAL AGGREGATE LIABILITY OF H3 MATERIALS ARISING OUT OF OR RELATING TO A PRODUCT, ORDER, OR TRANSACTION WILL NOT EXCEED THE AMOUNT ACTUALLY PAID TO H3 MATERIALS FOR THE SPECIFIC PRODUCT GIVING RISE TO THE CLAIM.

Nothing in these Terms excludes or limits liability that cannot lawfully be excluded or limited.

 

14. Claims

Any claim regarding product quantity, specification, condition, quality, or conformity must be submitted promptly after discovery and within any applicable claim period stated in these Terms or accompanying product documentation.

Customer must provide reasonable documentation supporting the claim, which may include photographs, lot information, product labels, shipment documentation, samples, quantities affected, and a description of the alleged issue.

H3 Materials must be given a reasonable opportunity to inspect or evaluate allegedly defective material before it is destroyed, returned, altered, or otherwise disposed of.

No return, disposal, field repair, replacement purchase, chargeback, deduction, or other remedy undertaken by Customer will bind H3 Materials unless authorized by H3 Materials or otherwise required by applicable law.

 

15. Intellectual Property

The H3 Materials name, trademarks, logos, graphics, website content, product photography, designs, documentation, and other proprietary materials are owned by or licensed to H3 Materials.

They may not be reproduced, distributed, modified, published, or used for commercial purposes without authorization, except as otherwise permitted by law.

 

16. Website Information

H3 Materials makes reasonable efforts to provide accurate product and commercial information, but specifications, availability, pricing, packaging, colors, finishes, and other information may change.

Photographs, renderings, illustrations, color charts, and other visual materials are provided for general reference and may not precisely represent actual product color, appearance, dimensions, packaging, inventory, facilities, or delivery methods.

Customers should rely on applicable written product specifications rather than photographs or renderings when making technical purchasing decisions.

 

17. Force Majeure

H3 Materials will not be liable for failure or delay in performance resulting from circumstances beyond its reasonable control.

Such circumstances may include severe weather, natural disasters, fire, flood, war, terrorism, civil unrest, governmental action, tariffs, trade restrictions, sanctions, labor disputes, strikes, transportation disruptions, port closures or congestion, carrier delays, utility failures, equipment failures, raw-material shortages, supplier interruptions, epidemics, pandemics, or other supply-chain disruptions.

Performance obligations affected by such circumstances will be suspended for the duration of the event to the extent permitted by applicable law.

 

18. Purchase Orders & Conflicting Terms

These Terms apply notwithstanding any additional or conflicting terms contained in a Customer purchase order, procurement portal, acknowledgment, or other Customer document.

Any additional or conflicting Customer terms are expressly rejected unless specifically accepted in a writing authorized by H3 Materials.

Processing, accepting, or fulfilling a purchase order does not constitute acceptance of additional or conflicting Customer terms.

 

19. Resale

Customers purchasing products for resale are responsible for providing their own customers with accurate product information and for complying with applicable laws, regulations, labeling requirements, and other obligations relating to resale.

Customer may not make warranties, representations, or guarantees on behalf of H3 Materials beyond those expressly authorized by H3 Materials in writing.

 

20. Electronic Transactions

Customer agrees that electronic orders, confirmations, invoices, acknowledgments, communications, and acceptance of these Terms may have the same effect as documents executed or delivered in writing to the extent permitted by applicable law.

 

21. Severability

If any provision of these Terms is determined to be invalid, unlawful, or unenforceable, that provision will be enforced to the maximum extent permitted by law, and the remaining provisions will continue in full force and effect.

 

22. No Waiver

Failure by H3 Materials to enforce any provision of these Terms does not constitute a waiver of that provision or H3 Materials' right to enforce it in the future.

 

23. Entire Agreement

These Terms, together with the applicable quotation, order confirmation, invoice, product specifications, and any separate written agreement expressly accepted by H3 Materials, constitute the agreement governing the applicable transaction.

No oral statement or prior communication modifies these Terms unless expressly incorporated into a written agreement authorized by H3 Materials.

 

24. Updates to These Terms

H3 Materials may modify these Terms from time to time.

Updated Terms become effective when posted unless otherwise stated. The version applicable to a particular order will generally be the version in effect when the order is accepted, except where otherwise required by applicable law.

 

25. Contact

Questions, order issues, freight claims, return requests, and product claims should be submitted through the contact methods provided on the H3 Materials website.

bottom of page